Fire Alarm Control Panel

2. SIMPLEX 4006 FIRE ALARM

ระบบ SIMPLEX 4006 Fire Alarm

Simplex 4006 Fire Alarm Control Panel (FCP)

4006; UL, FM and EIT standard

Simplex 4006 Fire Alarm Control Panel (FCP)

Suitable for small building

Simplex 4006 Fire Alarm Control Panel with Hard-Wired, starting at 5 zones (IDC) and extending the additional 5 zones (IDC) by adding an IDC 4006-9802 card for another 1 card, including 10 zones IDC of the Detector device Manual, Flow Switch etc. Can be connected to the evacuation alarm system with light. 2 circuits, NAC (can add another 2 NAC, total of 4), size 2A per circuit, with Power Supply set and Battery Charger. Packing size can be up to 25 Ah. Use 120 / 240AC 50 / 60Hz power with 24VDC Aux circuit. 500 mA Relay Out Put for use with 2 sets of Aux Relay which is Relay 1 for Programmable Operation, Relay 2 for N Trouble Operation Contac rated 2A @ 30VDC NO or NC (In case of increased NAC circuit, the Expansion Power Supply 3A, with 2 NACs, number 1 Card 4006-9802 can be added). Comes with 2-line LCD display panel, 20 characters long, with push buttons and LED for ALARM ACK., SUPV ACK, TROUBLE ACK, ALARM SILENCE, SYSTEM.RESET, AC power bulbs and 3 special programmable LED bulbs to monitor the operation of some connected devices that required to check specifically. There is a button to enter the program in a numeric format and ALPHANUMERIC KEYPAD and 5 NAVIGATION KEYS

Feature :

Use with initiating device and non-addressable conventional evacuation notification device.

(See Simplex Conventional Device for proper uses)

Simplex 4006 control panel can be connected to 4 Remote Annunciators as follows

  1. 1. 24 LED Annunciator on the front with FCP 4006 (Part No.4006-9122, beige) and (Part No. 4006-9121, red) for Detector ALARM 10 (Red LED) and 10 Detector TROUBLE zone (Yellow LED). 4 more yellow LED for circuit failure (NAC) notification
  2. Remote LED/Swich/Annunciator (Part No. 4610-9111)
  3. Remote LCD/Switch Annunciator (Part No. 4606-9101)